Damaged new PVC shower pan
While tiling the ceiling of the shower, one of the tiles fell and missing my protective covering, put a ding right in the middle of the curb at the door. Not big, about half the size of a pencil eraser. Any thoughts on how to at least, diminish the ding?
1. Use a sharp knife and trim away deformed material forming burrs or rough edges.
2. From a scrap piece of PVC pipe or elbow whittle a piece to fill the ding.
3. Use PVC glue to seal the piece into the ding.
4. After it hardens, trim away burrs or rough edges.
Like building a plastic model airplane.
Alan, thanks for the idea.
My customer is actually a model builder and I may request his assistance. I may use a Dremel to hone out. It's a bit of micro surgery.
|All times are GMT -5. The time now is 02:53 PM.|
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.