Chemical Used For Stripping Bathtubs Kills 13

BigJim

Beware of using this product where there is poor ventilation. Here is the link
http://www.npr.org/blogs/health/2012...13?ft=1&f=1001

by Nancy Shute
We've all seen those bathtub refinishing ads that promise a glossy new surface on the dingy old tub.
But a solvent used to make that transformation has killed at least 13 people who used it to strip bathtubs from 2006 to 2011, according to a new study. The chemical, methylene chloride, is sold as a solvent and paint stripper both to professionals and in dozens of do-it-yourself products sold at home improvement stores.
"I just went to my local hardware store and saw the same product," says Ken Rosenman. He's chief of the division of occupational and environmental medicine at Michigan State University and an author on the study, which was published in Morbidity and Mortality Weekly Report.
"The actual product said do not use in a bathroom," Rosenman says. That's because the fumes are very toxic, and it's impossible to ventilate a bathroom well enough to safely use it. That's what killed the 13 people. But that warning comes in very small print, he notes."I think there's a general concept, 'Hey, if I can buy this in my regular hardware store, I can use this.'"
All 13 people who died were working as professional bathtub refinishers, using methylene chloride to remove old paint before resurfacing a tub with polyurethane paint. Bathtub refinishing has become a popular home remodeling option, because it costs a few hundred dollars compared to the thousands required to remove and replace an aged tub.
A Michigan man who died in 2010 while stripping a tub had used about 6 ounces of a stripper that contained 60 percent to 100 percent methylene chloride. His exposure to fumes as calculated by the Michigan State researchers was 637 to 1,062 parts per million in the bathroom, and 11,618 to 19,364 parts per million in the tub.
That's way over the Occupational Safety and Health Administration's short-term exposure limit of 125 parts per million, or the National Institute for Occupational Safety and Health's dangerous to live and health level of 2,300 ppm.
Alternatives to methylene chloride as a paint stripper include acetate, mineral spirits and caustic pastes, Rosenman says, but they don't work as quickly.
The deaths highlight a problem with all the cans and bottles in the hardware store, Rosenman says: There are very few requirements for testing and labeling of chemicals sold for the do-it-yourself market.
He discovered the deaths while researching workplace-related accidents for NIOSH. Worker exposure to toxic chemicals is regulated, he notes, but do-it-yourselfers don't get the same protections.
"If you look at your typical whatever in the hardware store, there's no labeling requirement."
So DIY carefully.

__________________
New members: Please consider adding your location to your profile, it helps other members to give more accurate answers to your questions.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Jim

rossfingal

Jim -
Thanks!
Interesting!

RF

bikerpowell

Wow, thanks for the heads up

noquacks

Yup, a good carbon filter type mask would have saved the lives. They are not that expensive. many times, guys feel they are "stronger" than the next guy, and dont need the protection. protection is for "wimps"(?)

__________________
Alexander Pope: [a little knowledge can be a dangerous thing]

Red Squirrel

Wow, a product made for bath tubs with a small warning that says to not use in a bathroom because it's unsafe to do so? wow.

And yeah a mask would have helped. Turn on the bathroom fan, open a nearby window, wear a mask, and it should be fine.

Canucker

It would be worse in a bathtub, the vapours are heavier than air and would've concentrated at a low spot. Like the tub that you're stripping.

cleanerair56

Absolutely horrible! And very saddening...