Forums | Home Repair | Home Improvement | Painting | Interior Decorating | Remodeling | Landscaping


Go Back   DIY Chatroom Home Improvement Forum > Equipment & Safety > Tools

CLICK HERE AND JOIN OUR COMMUNITY TODAY...IT'S FREE!

Reply
 
Thread Tools Search this Thread Display Modes
Old 10-07-2007, 05:51 PM   #1
Member
 
Join Date: Apr 2005
Posts: 56
Share |
Default

Need part for Craftsman Jointer


I recently purchased a Craftsman Jointer on eBay. It works, but has a damaged part, which the Sears parts people tell me is no longer available, so I'm wondering if anyone has a broken one laying around that I could scavenge for parts. It's about 10 years old, is a model number 149.23628, and the specific part is the chip chute.

Can anyone help?
sherlock is offline   Reply With Quote
Old 10-08-2007, 10:49 AM   #2
Member
 
Join Date: Jan 2007
Posts: 276
Default

Need part for Craftsman Jointer


I couldn't even find that model. Are you sure it's the correct number? Do you have a photo of the part and the jointer?
Jeekinz is offline   Reply With Quote
Old 10-09-2007, 04:20 PM   #3
Member
 
Join Date: May 2006
Location: Western NYS
Posts: 123
Default

Need part for Craftsman Jointer


are you sure it isn;t somethign that could be fabricated out of sheetmetal or plastic?
mdlbldrmatt135 is offline   Reply With Quote
Old 10-13-2007, 01:56 PM   #4
Member
 
Join Date: Apr 2005
Posts: 56
Default

Need part for Craftsman Jointer


Here's a picture of the jointer and the broken part.

http://pweb.netcom.com/~profmoriarty/jointer.jpg

http://pweb.netcom.com/~profmoriarty/chip%20chute.jpg

Received the owners manual today, and was able to get the actual part numbers, but the sears website says they are unavailable. Chip chute number is 4540-042-70.

As you can see from the photo of the chip chute, the top piece of sheet metal has been peeled back like an anchovy can. I believe I can just cut off that piece of damaged sheet metal and it will work, but I would rather have the original part for safety's sake.
sherlock is offline   Reply With Quote
Old 10-19-2007, 09:38 AM   #5
Member
 
Join Date: Jan 2007
Posts: 276
Default

Need part for Craftsman Jointer


Straighten it out and bring it to an auto body shop to get tack welded.
Jeekinz is offline   Reply With Quote
Old 11-11-2007, 10:24 PM   #6
Newbie
 
Join Date: Nov 2007
Posts: 1
Default

Need part for Craftsman Jointer


I have one like yours and I need a motor the machine looks like new so i hate to part it out.could you contact me if you find someone with parts.

thanks
Ed
wbrnnr is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Carrier air handler blower part pwrengineer HVAC 8 04-16-2011 12:42 PM
Inducer Part Needed: Please Help! BDPNA HVAC 55 12-08-2010 08:48 AM
My house is a project...Part II "Deck Evolution" tigerbalm2424 Project Showcase 21 07-24-2008 10:37 AM
DecoRez two part system Questioner Introductions 4 12-10-2006 11:14 AM
Need to Jack up part of my house.... harleysilo Remodeling 24 10-01-2006 08:05 AM




Top of Page | View New Posts

Copyright © 2003-2014 Escalate Media. All Rights Reserved.