Dewalt Transmission schematic for Coldless Drill

Almaz

Can anyone provide some kind of picture for Dewalt transmission gears for cordless drill. I'm having problem to put all the gears back together into the transmissionfor Dewalt DC984 cordless hammer drill. Any schematic is fine so I can use it for reference.

Dansbell

http://www.ereplacementparts.com/dew...1162_2858.html

or

http://www.ereplacementparts.com/dew...1162_2859.html

or

http://www.toolpartsdirect.com/cgi-b...W984K-2_TYPE_1

Notice there may be a V or K derivative of your drill model.

Good Luck

__________________
Daniel S. Bell
Belbuilt, LLC
Cabinet Installation Medford, Oregon

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Almaz

Thanks Dansbell but it doesn't show transmission. It just shows the parts in general. I need schematic for inside the transmission. Any other suggestions?

SecretSquirrel

You can order the "exploded art" document from Dewalt Service Net

Almaz

Dear SecretSquirrel!
Dewalt Service Net does not have schematic of transmission gears. They have just a general parts picture. Any other suggestions?

Dansbell

I have never seen a more exploded view than these. The transmission is a replaceable part. I am sure it is possible to repair the transmission itself. I don't think DeWalt provides this schematic however since they probably see it as a disposable part. It sounds like you took it apart and cleaned it or made new parts for it and now you have forgotten how it goes together. I've been there. There are a few groups that use this transmission for robotics projects.
http://www.chiefdelphi.com/media/papers/1592
You may find someone else has experience with this transmission. Sorry I could not be of more help.

__________________
Daniel S. Bell
Belbuilt, LLC
Cabinet Installation Medford, Oregon

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SecretSquirrel

I logged in and using your model number was able to get as far as the exploded art category and the "transmission" was one of the selections. Without hitting the "purchase" button that's as far as I could take it. That's the only thing I can suggest else taking it to a service center and hope that a good natured tech will give you a copy of the schematic

Dansbell

Did you see a part number for it or a price? I could not find it there either. Are you registered as a Tool User or a Servicenet Tool Partner?

__________________
Daniel S. Bell
Belbuilt, LLC
Cabinet Installation Medford, Oregon

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

RippySkippy

The part # for the transmission for this model is 397892-05 and runs $26.07, not including S/H.

SecretSquirrel

Thanks Rippy!!!

Just to confirm, that part no. is for the exploded art document.


I logged in as a standard user. Clicked 'Technical Publications'. Entered 'DC984' in the 'Quick Document Finder'. Selected 'KA' as the extended model number of the hammerdrill. Selected 'Exploded English Art' and then a page was presented with all the documents relevant to that drill.

Almaz

The only problem I'm having right now with my transmission that changing speeds are very hard. For some reason I can't shift to third speed and when I shift to third speed, the motor spins but nothing happens. Looks like it was my big mistake for taking everything apart and regreasing it.

Dansbell

Item Number 11
Part Number 397892-05
Description TRANSMISSION
Required 1
Price $26.07

This is the actual transmission you can purchase to replace the transmission in your drill. All of the parts for your drill are listed below the exploded art that shows how to assemble these parts.

__________________
Daniel S. Bell
Belbuilt, LLC
Cabinet Installation Medford, Oregon

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SecretSquirrel

Thanks for the update Dansbell. I find it very misleading that they would list this as a 'Technical Publication'. The price for this "document" did seem a bit on the high side. Great detective work on your part!

wolfmangk

Where are you having trouble? I have done a few dual speed transmissions.

fabrk8r

wolfmangk...hopefully the OP has it repaired by now...these posts are 3 years old.

__________________
"The physician can bury his mistakes, but the architect can only advise his clients to plant vines." -- Frank Lloyd Wright