DIY Chatroom Home Improvement Forum

DIY Chatroom Home Improvement Forum (
-   General DIY Discussions (
-   -   Lennox G50UH series heating problem (

katie2000 01-08-2011 10:07 AM

Lennox G50UH series heating problem
Any help please. The blower is pushing out cold air. Upon turning on at the furnace port to examine operation, the blower initiates, the combustion air inducer runs for about 2 seconds, a series of clicking starts, the combustion shuts down the burners do not ignite and I am left wihth cold air blowing. The led indicators(#1 slow flash #2 steady on) indicate that the primary or secondary limit open and to check continuity or flow restrictions. Just put new filter in (the right way) because temp was dropping and did not know why. Any help from anyone. It's Saturday and I can't get a tech locally.

diyorpay 01-08-2011 10:12 AM


Repost this request under HVAC section. That's where the experts monitor questions.

Jackofall1 01-08-2011 10:30 AM

There is a limit switch to prove combustion air has pressure, sounds like this switch is not closing.

All times are GMT -5. The time now is 01:20 AM.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.

Search Engine Friendly URLs by vBSEO 3.6.1