osb vs. plywood
I've been reading about the two products. I'm hearing conflicting information. Some websites say they can be used pretty interchangeably. Some say to never use the OSB in certain locations due to the edge expansion. What is the concensus here as far as the following applications:
-exterior wall sheathing
here's some seemingly good info from http://www.umass.edu/bmatwt/publicat...s_plywood.html
Subfloors and underlayments serve as structural platforms and as a base for flooring products. Osb and plywood are equals structurally, but flooring manufacturers make different recommendations regarding their use as a substrate.
Joe Tarver, Executive Director of the National Tile Contractors Association, Jackson, MS says, “ Osb is not an acceptable substrate to receive ceramic tile, period!”
Wall sheathing: No news is good news. All manufacturers of siding products I contacted agree that osb and plywood are equals. Kevin Chung, Engineer with Western Wood Products Association in Seattle assures us, “There have been no problems reported from the field. Nail-holding and racking resistance are the same.” Chung has noticed some concern about the use of osb among builders, but is quick to add, “There is no reason for any concern. Both products serve equally well as a nailbase.”
This is our feeling on the matter as well as the General contractors that I am acquainted with in my region:
Wall sheathing: OSB ok
Roof Sheathing: We never use OSB, just CDX
Floor sheathing: We never use OSB, we prefer advantek sub floor
|All times are GMT -5. The time now is 04:34 PM.|
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.