A year ago we had a new block paved driveway installed. After a few months, we started to notice a few dips appearing in the drive. A year later, there are quite a lot.
As I can't get hold of this person (typical, cash in hand job, call me a fool) I need to know is this normal, and if so, what is the easiest way of going around sorting the dips out?
Sorry to say, it sounds like you are a victim of shoddy work. It would appear as though the base was not prepared properly. Were I you, I would make every effort to track the contractor down and have him rectify the problem as it is not a small one. To repair this properly you will have to remove everything and start over with a solid base.
Info on how it should be done is everywhere, Google 'installing pavers' for lots of articles.
|All times are GMT -5. The time now is 01:55 PM.|
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.