Double Post (removed)
I have a Tsingtao Neon Light Sign. I have not worked with neon lights before but have experience in wiring standard lighting. Due to the high voltage I am looking for some advice before I stick my screw driver in!
Neon Tech Model: 210 AID E202660
Indoor Type 7
Input 120 VAC 50/60 HZ 1.5 Amps
Output 2,000-10,000 V 47mA
When I plug it in, it lights up for a second then goes out. If I unplug it and replug it in immediately, nothing happens. If I wait to plug it back in a good 3 to 5 minutes, it will light up for a second again.
If someone could guide me on where to start troubleshooting this bad boy it would be great.
I'd try a different power supply to start with.
Just don't sit on the bare wires like this one guy I know did when we were working on an art project.... he hit the ceiling.... lol
Google came up with:
might try it or others.
|All times are GMT -5. The time now is 06:27 PM.|
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.