Make sure you clean the condensor coil completely on that unit. Pain in the arze on them but if you remove the condensor fan and backflush water thru it it can be done. Then flush it from the outside in. Make sure the wires to the fan go in properly when reinstalling it or the blade will chop them off. Make a note of this JJ. Always make sure the wires go back in place and fasten them with zip ties if necessary. Real embarrassing when the fan chops them off and the customer is standing there.
"Cut it twice and it is still too short".
Last edited by yuri; 07-09-2011 at 08:39 AM.
The Following User Says Thank You to yuri For This Useful Post: