DIY Home Improvement Forum banner

Bryant Pilot Burner

2K views 2 replies 2 participants last post by  modemjim 
#1 ·
My Bryant gas furnace stopped heating. I explained my problem to the local Bryant dealer and he suggested I replace the Pilot Burner (# LH-33JZ-053). I replaced it, turned it on and it ran good for about a hour and I figured it was fixed (it did seem that the burners was cycling too fast, but didn’t know for sure). Didn’t need it again for about 2 weeks. Turned it on, pilot is burning but no flames. Went back to the dealer, got another Pilot Burner, same as before. Ran it for an hour everything fine as before tought it was fixed again. Two days later needed heat ,same problem as before only this time the flames comes on, but as soon as the fan kicks on the flames went out didn’t light again. This pilot burner has two wires that connect to the gas valve. No other wires connect to the valve. No problem with the pilot staying lite, the valve will not allow gas to the burners. Can anyone help me out on this.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top