Am Standard Freedom 80 Furnace Fan Motor
The other night, the circulating fan was humming, trying to start.I have replaced the fan motor on the squirrel cage and the capacitor. Now, when I have a call for AC, the only fan that turns on is the inducer fan. I'm beginning to think that we had a surge that may have fried the board.
ensure it is wired properly... check for voltage at the cooling blower tap on the control board with a call for cooling from the stat.
|All times are GMT -5. The time now is 09:57 PM.|
Copyright © 2003-2014 Escalate Media LP. All Rights Reserved