When tapping end joints by tapered joints, or other areas where taping will overlap.
Do you overlap the tape or cut it so it doesn't over lap.
I have always ran tape from the butt joint into the factory joint, I do this first then tape the factory joints and leave the corners for last. Not saying it's the only way or the right way but it's the way I have done it for years.
|All times are GMT -5. The time now is 05:28 PM.|
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.