Go Back   DIY Chatroom Home Improvement Forum > Home Improvement > Drywall & Plaster

CLICK HERE AND JOIN OUR COMMUNITY TODAY...IT'S FREE!

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-31-2014, 02:19 PM   #1
Newbie
 
Join Date: Jan 2014
Posts: 11
Share |
Default

cover or replace wood paneling


I'm considering buying a home that needs a refresh. Among other things, I'd like to remove the wood paneling in the finished basement and family room.

is my best bet to simply cover the paneling with 1/4" dry wall? I plan to replace all the mouldings anyway, but would I run into any issues with electrical or door jams? It feels like taking it to the studs is the right thing to do, but I tend to go overboard with this stuff and don't want to waste a lot of money and time if there's no real upside.

rtmunro is offline   Reply With Quote
Old 01-31-2014, 04:06 PM   #2
Member
 
Jb1234's Avatar
 
Join Date: Aug 2012
Location: Chicago-area, il
Posts: 118
Default

cover or replace wood paneling


Upside is you get to see what is behind the walls if you rip it out. Can check easier for proper wiring, insulation, run new outlets if you want, etc. But if you drywall over, outlets will be easy. They sell extension rings. But doors and windows would have to be retrimmed with extensions. Without seeing pictures, I'd vote gut because I like demo. Lol.

Jb1234 is offline   Reply With Quote
The Following User Says Thank You to Jb1234 For This Useful Post:
Gymschu (01-31-2014)
Old 01-31-2014, 05:17 PM   #3
Member
 
Join Date: Sep 2012
Location: outside ocala fl
Posts: 3,194
Default

cover or replace wood paneling


Remove it
ToolSeeker is offline   Reply With Quote
The Following User Says Thank You to ToolSeeker For This Useful Post:
Gymschu (01-31-2014)
Old 01-31-2014, 05:27 PM   #4
Member
 
Gymschu's Avatar
 
Join Date: Dec 2010
Location: Eastern Ohio (heart of Appalachia)
Posts: 2,660
Default

cover or replace wood paneling


I agree with JB & TS. Take it out. Paneling is actually easy to remove. It's usually held in place by short, narrow gauge, ring shank nails that are easily removed. Sometimes it is GLUED onto the walls and that takes some of the "easy" out of the equation, but it is still doable. You won't regret removing it.
Gymschu is offline   Reply With Quote
The Following User Says Thank You to Gymschu For This Useful Post:
ToolSeeker (01-31-2014)
Old 01-31-2014, 08:29 PM   #5
Member
 
Join Date: Dec 2013
Location: CoastalME
Posts: 117
Default

cover or replace wood paneling


Demo always risks opening a can of worms. I don't demo unless I have to. Pull trim, put on extensions, and throw up 1/4".
eandjsdad is offline   Reply With Quote
Old 01-31-2014, 08:35 PM   #6
Member
 
Jb1234's Avatar
 
Join Date: Aug 2012
Location: Chicago-area, il
Posts: 118
Default

cover or replace wood paneling


By can of worms, you mean you would prefer to not know what's going on inside of your walls and hope for the best? I'm guessing he won't need to pull permits and have an inspection. To each his own, but I'd prefer to know all is well instead of putting time/money into a half reno and then discover years later something is wrong and have to rip it all out.

Now he doesn't even own this home yet so I'm sure there's things he can't answer just yet. But if the basement was finished by a homeowner and paneling was thrown up over the walls, I'd have concerns as far as how electrical was run, any signs of seepage, proper insulation, foundation issues. Was cheap paneling thrown up over the walls to conceal things such as this and hope for a quick sale? OP, just make sure you hire a qualified home inspector if you move closer to purchase to rule some of these things out.

Last edited by Jb1234; 01-31-2014 at 08:41 PM.
Jb1234 is offline   Reply With Quote
Old 01-31-2014, 09:28 PM   #7
Member
 
Join Date: Dec 2013
Location: CoastalME
Posts: 117
Default

cover or replace wood paneling


I don't see anyone doing demo to do lipstick - IMO scope creep is a kind of sickness. Whether a house is brand new or old, you can't tell if it has hidden problems unless it shows symptoms. Until then, there's no real reason to demo. If there is no problem, it's a waste of time and money, if there is a problem, you just blew the lipstick budget and timeline.

He could just skim coat the paneling and be good, for that matter -either way, it's a small, fast, inexpensive job.
eandjsdad is offline   Reply With Quote
Old 01-31-2014, 11:02 PM   #8
Member
 
Jb1234's Avatar
 
Join Date: Aug 2012
Location: Chicago-area, il
Posts: 118
Default

cover or replace wood paneling


The only step you are adding is ripping off paneling unless I'm missing something? 1/4 to 1/2 drywall cost is negligible. So if he's screwing drywall over the paneling he still has to tape and mud. He's still pulling all the trim off and has to retrim. I don't really see where the extra money is involved other than disposal of the old panelling. Time I would imagine would only be a few hours to demo. So I don't know how taking off paneling is such a bigger ordeal than putting up the drywall. Skim coat paneling, I think that would be fairly disgusting looking. I don't think I would call doing a whole basement and family room a small inexpensive job. Granted we don't know the dimensions of the rooms or number of doors/windows involved, but this would not be a Saturday afternoon bang out job.

Also the whole point of doing more of a demo is to catch early symptoms before they show. So if he has mold growing on the inside of the walls that isn't showing yet, should he wait for himself and his family to exhibit symptoms before it's looked in to?

Last edited by Jb1234; 01-31-2014 at 11:06 PM.
Jb1234 is offline   Reply With Quote
The Following 2 Users Say Thank You to Jb1234 For This Useful Post:
Gymschu (02-01-2014), ToolSeeker (02-01-2014)
Old 02-01-2014, 06:01 AM   #9
Member
 
Join Date: Sep 2012
Location: outside ocala fl
Posts: 3,194
Default

cover or replace wood paneling


I totally agree why half arse it when it would be such an easy demo. An other doomsday scenario. The paneling will not absorb water like drywall so a small leak could go for a LONG time before it shows, and this gives mold a long time to grow. Whereas drywall will show a leak pretty quick.
Sometimes it's a good thing to open a can of worms like this. You can find things like faulty wiring, termite damage, plumbing issues that need addressed, now is the time to find them, not after you remodel.
ToolSeeker is offline   Reply With Quote
Old 02-01-2014, 06:37 AM   #10
Member
 
Jb1234's Avatar
 
Join Date: Aug 2012
Location: Chicago-area, il
Posts: 118
Default

cover or replace wood paneling


And here's the optimistic side. You rip it out and everything is 100% up to code and bone dry, then you aren't left to wonder. You know there shouldn't be anything that will creep up on you. To each they're own, but when it comes to my house I'm not one to hope for the best, keep my fingers crossed and keep things covered up and believe what I don't know won't hurt me.
Jb1234 is offline   Reply With Quote
Old 02-01-2014, 08:06 AM   #11
Member
 
Join Date: Dec 2013
Location: CoastalME
Posts: 117
Default

cover or replace wood paneling


I don't recommend doing a gut to inspect anything just to calm fears. If you want to make sure you don't have moisture issues, do a whole house inspection with a non-contact moisture meter periodically, and monitor the RH in problem areas - $50 for a base station and sending units, a few hundred of the NC moisture meter. Gutting the basement will do nothing about the mold growing in the bathroom walls.

Gutting the basement isn't going to do anything about the nail in the wire in the bedroom wall that's going to burn your house down. Finding those isn't cheap or easy, but an AFCI breaker upgrade reduces the risk. Thermal imaging with loads on all devices for a few hours can find things like tape splices in the walls and poor device connections / faulty devices, but it's a little pricey - it can make sense if you're checking insulation in the whole house.

Gutting is a silly way to inspect a house, even if it's easy to gut. If you're doing a lipstick, do a lipstick, if you're doing energy upgrades, do energy upgrades, if you're doing moisture control, do moisture control, and so on. Personally, I check for wet areas, air leaks, and insulation problems (beyond the obvious roof / attic inspection). Moisture control takes periodic checking over multiple seasons. It isn't something you can always just look at and tell there's an issue you need to fix, it's frequently a combination of weather conditions and home use / water vapor load that creates recurring invisible problems, until you;re 5 years down the line and have to do a gut to correct mold problems.
eandjsdad is offline   Reply With Quote
Old 02-01-2014, 08:11 AM   #12
Member
 
Jb1234's Avatar
 
Join Date: Aug 2012
Location: Chicago-area, il
Posts: 118
Default

cover or replace wood paneling


I think the point is still being missed here. How is pulling paneling off a wall that big of a deal when you're going to be drywalling anyway? We never said it was to do a full house inspection, but on how to do things right.

Last edited by Jb1234; 02-01-2014 at 08:19 AM.
Jb1234 is offline   Reply With Quote
The Following User Says Thank You to Jb1234 For This Useful Post:
Gymschu (02-01-2014)
Old 02-01-2014, 09:52 AM   #13
Newbie
 
Join Date: Jan 2014
Posts: 11
Default

cover or replace wood paneling


For what it's worth I do lean toward JB's way of thinking and am happier to rip out anything I did not install, start fresh and rebuild it right. Even if it may have been built right to begin with. Add to that the opportunity to run outlets, speaker wire and lights, which I hadn't thought of, weighted against the minimal extra effort and cost and I will rip/replace.

I definitely appreciate the counterpoint but I think that's the way to go for me.
rtmunro is offline   Reply With Quote
The Following 2 Users Say Thank You to rtmunro For This Useful Post:
eandjsdad (02-01-2014), ToolSeeker (02-01-2014)
Old 02-01-2014, 10:46 AM   #14
Member
 
Jb1234's Avatar
 
Join Date: Aug 2012
Location: Chicago-area, il
Posts: 118
Default

cover or replace wood paneling


RT, keep us updated and post before and afters if you are able to. Yup, being able to run/adjust placement of outlets/wall switches is huge. Like you said run speaker wire, HDMI for TV's, put up extra blocking in the wall if you'll be mounting a TV. In the end you'll have less to fight with and have it set up your way. Some guys I think we're almost viewing this like you were doing it for a "flip". You weren't looking to put lipstick on a pig and try to turn a quick buck. This is the house you want to live in and have been nice for you and family.
Jb1234 is offline   Reply With Quote
The Following User Says Thank You to Jb1234 For This Useful Post:
ToolSeeker (02-01-2014)
Old 02-01-2014, 11:27 AM   #15
Member
 
Join Date: Dec 2013
Location: CoastalME
Posts: 117
Default

cover or replace wood paneling


Quote:
Originally Posted by Jb1234 View Post
I think the point is still being missed here. How is pulling paneling off a wall that big of a deal when you're going to be drywalling anyway? We never said it was to do a full house inspection, but on how to do things right.
If you've been around, you know there are multiple "right" ways. I certainly know professionals that would give the advice you gave, but then you have to boost your budget and schedule for the unknowns. Worst case he winds up tearing out everything, reinsulates, etc. You don't know how easy it's going to be.

If this is unpermitted, then he can get by with any number of things, but I don't recommend this at all. I'd automatically take on added liability if I took the paneling off - this may also be true for the HO doing it. There is also the often overlooked factor that the insurance value in event of a claim is higher for having drywall over paneling than it is for just drywall.

More importantly, visually inspecting two areas in a house doesn't guarantee the house doesn't / won't have mold, electrical problems, plumbing problems, etc.

Basically, this all boils down to a judgement call for the HO - how much time and money he has available, and what he's willing to do. I don't think there in any sense sinking time and money down a path if you aren't willing or able to see it out. Make the decision up front, and then you live with it / see it through. The time/budgets for putting up some sheet rock vs tear out, perimeter drain, air seal, insulate, structural framing repairs, foundation repairs, frame, wire, plumbing replacement, drywall, etc are vastly different. It all boils down to what he's prepared to do.

eandjsdad is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help oiling wood paneling Rav Painting 21 02-05-2013 09:18 AM
Wood Paneling on Music Room StarStryker11 Interior Decorating 5 12-20-2012 08:35 PM
Painting interior fake wood paneling shoothebunnies Painting 1 05-31-2012 04:28 PM
Very old house replace all basement wood beams? HQZ Building & Construction 14 09-25-2010 09:11 PM
prepping old wood for painting newb questions afabco Painting 19 08-07-2008 11:19 AM




Top of Page | View New Posts

Copyright © 2003-2014 Escalate Media. All Rights Reserved.