DIY Chatroom - DIY Home Improvement Site
    DIY Forum     DIY Blogs     DIY Articles     Photos     Woodworking     Advertise     Contact Us  
More On This Topic

Now we're going to create a splatter shield because we're going to be doing some splattering on this one. So basically it's going to be 8 1/2 by 11. Full sheet 11 by 17. Just use anything they send you in the mail that you don't want. There's lots of... Read More »

We're going to do some more splattering so I'm going to show you how to build a splatter shield. So you want to get a piece of plastic or a piece of glossy printing, possibly from some junk mail and you want to fold it over in half and tear a random... Read More »

We're going to take our splatter shield. And the way you make this, is you just get a piece of paper, fold it over and you just start pulling out randomly to make a hole, that's basically an inch and a half about an inch and a half. And you put this over... Read More »

What we're going to do now is wet in wet. This is one thing that watercolor can do that, really, oil and acrylics don't do quite as well, if at all. So we're going to basically wet with clean water or a light flat wash, and then we're going to add color... Read More »

Now what we're going to do, is come into the middle of the field. And put a darker color, as a suggestion. And then get a very dilute color and splatter in the center. A big part to dilute. Too much water on the brush. The other hand here. Finished piece... Read More »

Pluck Legal and Privacy