|
| DIY Forum | DIY Blogs | DIY Articles | Photos | Woodworking | Advertise | Contact Us |
|
More On This Topic Okay we are over here at tub number 2 where we are going to install a PVC pipe drainage system and this pipe doesn't have any holes in it. You can buy a pipe that is perforated cause this is a thin wall sewer type pipe. But the problem is with a thin... Read More » Okay we are here at tub number 2 and we are finishing the drainage system with using PVC pipe. You will notice that I've only drilled holes on one side. The other side of the pipe is intact. We are going to roll the pipe over so that the holes are to the... Read More » Okay here at tub number 2, we've got the PVC pipe with holes drilled in the bottom and we are going to add some of those caster bean stalks to the bottom. The reason that I am doing this is to supply a more porous layer down where the water needs to move... Read More » Our raised bed situation here is different from some. Although any raised beds container that would potentially hold water is going to have the same problems we have here with this bathtub. Bathtubs obviously are made to hold water for peats sake, and... Read More » Here in our number one tub we're going to finish the drainage and add some structure and little strength to the drainage area in the bottom of the tub. The second flat reinforced by cans goes in and it gives us a drainage that goes all the way to the... Read More » |
|
DIY Chatroom™ © 2003 - 2008 The Building Network LLC Our Network: DIY Forum | Contractor Forum | Woodworking Forum | Painting Forum | Drywall Forum | Electrician Forum | Plumbing Forum .. |