Gluing the First Hinge of Folding Puppet Theater - DIY Chatroom - Home Improvement Site

DIY Chatroom - DIY Home Improvement Site

Carpentry | Construction | Electrical | Flooring | HVAC | Landscaping | Painting | Plumbing | Roofing

Gluing the First Hinge of Folding Puppet Theater

I will show you on this completed puppet theater how the hinges work. You attach one hinge on the front panel and one panel and then over here, you attach the other hinge to the front panel and the second panel. It gives you kind of a z shape like this. It allows you to open the whole puppet theater and set it up any way you want and it allows you the flexibility to reverse the puppet theater. So, if you want to make two different sides on your puppet theater. You can have a completely reversible puppet theater, and then it all folds up nicely like the size of a book and you can put that right on your bookshelf. You want to decide which order you are going to put your panels in. So, you just set them up the way that you want them. And we'll start by doing these two panels first, and when they fold it's going to be, it'll fold together like this. So, the hinge is going to be placed on this edge like this holding these two panels together that will be able to open like this. So, first, we'll apply the webbing to the front panel along this edge. We're going to use glue and a nice heavy duty stapler to apply the hinge and give it a good strength. So, you want to use a glue that is clear and a real nice strong glue and we'll first put that along the edge and then we'll lay the webbing down in that place. So, I am just taking a little of this very strong clear adhesive and this will hold it in place and give it extra strength even though we're stapling it in place. We're using the glue to give it extra strength. These hinges will get a lot of use with your puppet there, so you want to make sure that you attach them nice and strong. So, just a little bit of glue all the way down the edge there and then place your webbing, the measured amount that you want over lapping. You want to make sure that you don't make it too tight when it's closed, so we'll put this on and then we'll try it on the two panels again and then we'll glue the other side. We'll let that set for a bit and then we'll staple.

Gluing the First Hinge of Folding Puppet Theater video by Expert Village.com

More On This Topic

Related: puppet, glue, theater, panels, edge

Gluing the First Hinge of Folding Puppet Theater

Gluing the First Hinge of Folding Puppet Theater by expertvillage

Take care gluing the hinges in place so your theater is sturdy enough for kids to use! Start a table top puppet theater in this free craft video. Read More »

Gluing & Stapling Panels of Folding Puppet Theater

Gluing & Stapling Panels of Folding Puppet Theater by expertvillage

Construct sturdy puppet theater panels, since kids can get rough with crafts. Start a table top puppet theater in this free craft video. Read More »

Making the 2nd Hinge of Folding Puppet Theater

Making the 2nd Hinge of Folding Puppet Theater by expertvillage

The second hinge on a folding puppet theater is larger than the first. Start a table top puppet theater in this free craft video. Read More »

Mark the Hinges of a Folding Puppet Theater

Mark the Hinges of a Folding Puppet Theater by expertvillage

Parts of your puppet theater need to hold the webbing or fabric of the hinges. Start a table top puppet theater in this free craft video. Read More »

Making Hinges for Folding Puppet Theater

Making Hinges for Folding Puppet Theater by expertvillage

A folding puppet theater requires web or fabric hinges to stand upright and close. Start a table top puppet theater in this free craft video. Read More »

Pluck Legal and Privacy

DIY Chatroom™ © 2003 - 2008 The Building Network LLC

Our Network: DIY Forum | Contractor Forum | Woodworking Forum | Painting Forum | Drywall Forum | Electrician Forum | Plumbing Forum
..