DIY Chatroom Home Improvement Forum - Blog Entries
Advertisement


Go Back   DIY Chatroom Home Improvement Forum > DIY Blogs

CLICK HERE AND JOIN OUR COMMUNITY TODAY...IT'S FREE!

Old

sump pump pit

Posted 08-30-2014 at 10:18 AM by gloria voland

i wanted to check if my sump pump is working and it is working but i could not test it due to the sumpit is draining the water underground while im filling it up. what would be the cause of the water draining down. The pit is bottomless. But before i can refill it with no problem.
Newbie
Posted in Uncategorized
Views 795 Comments 1 gloria voland is offline
Old

Changing a breaker?

Posted 08-27-2014 at 12:57 PM by PaulieD69
Updated 09-12-2014 at 06:13 AM by PaulieD69

I currently have a 30 amp breaker that keeps tripping. Not all the time, kinda goes in spells where it will trip every 5 minutes or so.
I am in the process (next day or 2) of changing said breaker with another 30 amp. My question is, can I change it to a say 45 amp? Would that screw up anything?

I am not very experienced at electricity, so any help would be appreciated.
Thanks in advance!
Newbie
Posted in Home Improvement
Views 1048 Comments 2 PaulieD69 is offline
Old

When main breaker is off, I have 3-4 live circuits anyway.

Posted 08-24-2014 at 09:15 PM by urbukstpshr

I'm having trouble with 4 separate circuits, at the same time, suddenly going dead and usually in a few minutes they are live again. The circuits involved are single circuits. Washing machine, both kitchen receptacle circuits, and the clock in the range yet the burners do come on. Possible the burners are only live with 110. Most recent testing was this..With the main breaker off, these prementioned circuits were still live. Does this mean I have a bad main breaker?
Newbie
Posted in Uncategorized
Views 838 Comments 0 urbukstpshr is offline
Old

Just wanted to introduce myself

Posted 08-23-2014 at 11:35 AM by mnocella

I'm Michael btw... new to this site.. hope to contribute to the forum. Please check out my website if you get a chance thank you!
Newbie
Posted in Uncategorized
Views 865 Comments 1 mnocella is offline
Old

Unknown tool

Posted 08-21-2014 at 12:53 PM by George T

When we closed my father-in-laws estate, we found the attached in his tool box and are wondering what it is. Both cylinders are aluminum, connected by a bracket and approximately 7/8th "in diameter. The right cylinder is almost 5" long and has screw on caps on both ends. The bottom appears to have a wax seal inside and the upper cap houses a cotton wad. The left cylinder is about 4 1/8th" inches long and the neck at the top is about 1". When the cap on the angle is removed, there...
Attached Thumbnails
Click image for larger version

Name:	Unknown tool.jpg
Views:	86
Size:	86.9 KB
ID:	20  
Newbie
Posted in Uncategorized
Views 699 Comments 1 George T is offline



Top of Page | View New Posts